Henan Yuanda Boiler Co.,Ltd
Henan Yuanda Boiler Co.,Ltd Industrial Boiler Manufacturer Since 1956
Add to Cart
Package 1400KW Dual Fuel Oil Gas Fired Thermal Oil Heater Boiler For Asphalt
Thermal oil boiler also called thermal oil heater, thermal fluid heater, hot oil boiler, heat transfer oil boiler, is a new type of special boiler with low pressure and high temperature working characteristics.
YY (Q) W series thermal oil heater boiler is quick-fitting forced circulation fuel oil gas boiler, this series boiler's is compact structure, the heating area is constituted by closed coil pipes from inside, outside (or internal and external), inside coil pipes are the radiation heating surface. Fuel in inside the inner coil pipe form the combustion chamber, the fuel burn inside and release heat and absorb most of the quantity of heat after radiation heating, high temperature flue gas transfer heat through convection heating surface, then go into the air preheater (or waste heat boiler) to heat the required air (or water), the low temperature flue gas from boiler discharge directly to the chimney then to the atmosphere.
Application:
Thermal oil boiler can be used for heating in various production process where the heating temperature requirements is between 150℃ and 350℃.
Adaptable Industrial Fields:
■Wood industry: Drying and forming of beaver board, shaving board, laminated sheet, etc.
■Building industry: Asphalt dissolution, concrete heating tank, waterproof material, felt production, etc
■Textile dyeing and finishing Industry: Heat setting, textile printing, ageing, drying, etc.
■Plastic and rubber industry: Hot pressing, calendering, extrusion, vulcanization, artificial leather processing, etc.
■Chemical industry: Polymerization and condensation reaction, distillation, rectification, concentration, evaporation, fusion
■Oil production industry: Decomposing, deodorization, oil acid distillation, hydrogenation and esterification reaction, etc.
Specification of 1400kw Thermal Oil Heater Boiler
| No | Item | Unit | Data |
| 1 | Model | / | YY(Q)W-1400Y(Q) |
| 2 | Rated thermal power | KW | 1400 |
| 3 | Rated working pressure | MPa | 0.8 |
| 4 | Heat carrier output temperature | ℃ | 280 |
| 5 | Heat carrier input temperature | ℃ | 250 |
| 6 | Heat carrier circulating flow | m3/h | 74.696 |
| 7 | Radiation heating area | m2 | 7.79 |
| 8 | Convection heating area | m2 | 45.29 |
| 9 | Gas consumption | Nm3/h | 169.11(gas) |
| 10 | Oil consumption | kg/h | 138.78 (oil) |
| 11 | Energy saving machine heating area | m2 | 25.75(gas) |
| 12 | Carrier flow speed of Radiation area | m/s | 2.54 |
| 13 | Carrier flow speed of Convection area | m/s | 2.54 |
| 14 | Designed fuel | / | Gas/Oil |
| 15 | Volume of Carrier | m3 | 1.2 |
| 16 | Designed efficiency(oil/gas) | % | 92 |
| 17 | Exhausted smoke termperature(oil/gas) | ℃ | 124 |
| 18 | Main part size | mm | 3710×1524×2150 |
| 19 | Main part weight | 4 |
Unique Design Features:
1. Three pass coil pipes design, thermal oil goes through the coil pipes and fire in the furnace, which makes the boiler has big radiation heating area, highly improves the boiler efficiency and preventing deformation of boiler shell in high temperature heating.
2. Unique heating surface of the back of boiler--smoke turning around room is wet back design (smoke turning around room is surrounded with oil), which avoids dry heating of tube sheets and reduce heat loss.
3. Energy saving device design, air pre-heater or waste heater boiler or economizer is designed at the end of the boiler, which makes the exhaust temperature low and improves 10% of boiler efficiency.
4. Outputting oil tank external design, slow down the rate of carbonization of fat and avoid accidents.
5. Dislocation double sealing slot design,secondary leakage prevention, which seals very tight and avoid leakage.
6. The boiler is equipped with world famous brand burners and valves groups such as Baltur, Riello, Weishaupt, Oilon etc. , 80% configuration, making the combustion more sufficient with lower failure rate.
YYQW series thermal oil boiler system and auxiliary list
| Number | Item | Brand | Number | Item | Brand |
| 1 | Boiler proper | Yuanda | 6 | Oil Pump | CNP |
| 2 | Burner | Baltur, Riello, Oilon | 7 | Expansion oil tank | Yuanda |
| 3 | PLC Control Cabinet | Yuanda | 8 | Storage oil tank | Yuanda |
| 4 | Economizer | Yuanda
| 9 | Chimney | Yuanda |
| 5 | Circulating pump | CNP | 10 | Valves&Instrument | Gaoshan |
Quality Control :
1. 100% Non-Destructive Inspection report of steel plate tube & welding rod;
2. 100% X-ray inspection report (welding seam), make sure welding totally qualified;
3. Hydraulic test: make sure strength and tightness of pressure parts
4.Third part inspection report: By China Henan Boiler Inspection Institute
After-sale service:
1. provide full range of original spare parts.
2. We will send engineers to your local project site to guide the installation and commissioning.
3. Our engineers will held a training for boiler workers to ensure the safe operation.
4. Free maintenance and repair for one year and lifelong service.
Why choose Yuanda Boiler?